Monday, September 9, 2013

Re: Unifi Controller Port 8080 is used by other program.

Hi,
I had the problem of "port 8080 is being used by another program" happen once and I discovered that there was an unresponsive instance of the Unifi Controller running in the background. Ended both the current and hidden unresponsive Unifi Controller instance via Task Manager and when I brought it back up it worked.

For your second question of running a voucher system without a controlling computer, the answer is no, you cannot do that. The guest portal is presented by the controlling computer whether or not you use the simple password, voucher or hotspot authentication methods so if the controlling computer is not present your guests will never reach the guest portal and therefore will not get authorized ultimately leading to no internet access for them.

Saturday, August 24, 2013

Forwarding messages from outlook to gmail

Forwarding messages from outlook to gmail


I have been asked to help some one to forward all his mail messages from Outlook exchange account to his Gmail folder.
So to achieve that you need to open your outlook.
Go to Tools->Rules and Alerts…
Rules and Alerts
Then you need to create a new rule. in the window that popped up you click on the new rule button.
create a new rule
Then you get the rule window with templates in it.
Click on next and you get the default rule that you are about to customize.
Change the marked item in the list of “Step 1:” to “through the specified account”
through the specified account
Click on the first link in the “Step 2:” box.

Select the account you want to forward
Select the account
Click on OK.
Then click on next and change the selection to “forward it to people or distribution list”

Go to “Step 2:” and click on the second link
In the window that opens type the email account you want to forward it to
email account
Now click on OK and Finish.
That is it. test the forward with an email self addressed.

Friday, August 9, 2013

Monday, August 5, 2013

Traceroute through Cisco ASA Firewall

To allow inside hosts to be visible to outside hosts use following:

access-list OUTSIDE-IN extended permit icmp any any echo

Following lines will make inside hosts visible to outside using taceroute:

access-list OUTSIDE-IN extended permit icmp any any echo-reply
access-list
OUTSIDE-IN extended permit icmp any any source-quench
access-list
OUTSIDE-IN extended permit icmp any any time-exceeded

Service policy on the firewall also needs to be updated to inspect ICMP traffic

policy-map global_policy
class inspection_default

set connection decrement-ttl

inspect icmp
inspect icmp error


 

Add Access-list to access-group

access-group OUTSIDE-IN in interface outside

Thursday, July 25, 2013

How to play song in Hole Mode PABX TD1232(SMC)

Connect main phone to with PABX TD1232
===============================
Connect Audio cable to Music2 on PABX TD1232
====================================

On main phone: Press  Program ==> *#1234567

Press code: 803

Click: SP-Phone = Enter

Select : Hode = Music 2
Select : BGM = Music 2

=================


Wednesday, June 5, 2013

Step-by-Step Guide to Remote Assistance

Using Remote Assistance via saving a file

This section shows how to initiate a Remote Assistance invitation by saving the request as a file. This allows you to use Remote Assistance via Web-based e-mail such as Hotmail or other similar services.
In this scenario, user Jon Grande initiates the same request as explained above.
  1. Jon clicks Start, clicks Help and Support, and under the Ask for assistance heading, he clicks Invite a friend to connect to your computer with Remote Assistance. The Remote Assistance page appears as shown in Figure 7 below.
    Figure 7: Inviting someone to help you
    Figure 7: Inviting someone to help you
  2. Jon clicks Invite someone to help you and selects Save Invitation as a file.
  3. Jon enters his message and clicks Continue.
  4. The Save File dialog box appears and Jon is prompted to save the file in his My Documents folder as shown in Figure 8 below.
    Figure 8: Saving the Remote Assistance file
    Figure 8: Saving the Remote Assistance file
  5. Jon opens his Hotmail e-mail, attaches the file from his My Documents folder and sends the message to Cynthia Randall.
  6. Cynthia opens Jon's message, saves the attached file to her My Documents folder and opens it. The Remote Assistance Invitation box appears as shown in Figure 9 below.
    Figure 9: Accepting the Remote Assistance request
    Figure 9: Accepting the Remote Assistance request
  7. Cynthia enters the password and clicks Yes.
    Note: Paul will have needed to let Cynthia know what the password is in a separate communication such as a phone call or secure e-mail. Typically, users should relay the password via a phone call.
  8. The Attempting to Start Remote Assistance Session with Paul West box appears. Cynthia is able to begin Remote Assistance as explained in the previous example.

Saturday, May 4, 2013

No Terminal Server Client access licenses



Solution:
- start>run>regedit>hkey_local_machine\software\microsoft\mslicensing......once here delete the mslicensing folder.

try to connect after deleting said folder...

Weldone :-)