Monday, March 12, 2018

How to activate window 10 and window server 2016 via command line

If you are having problems activating Windows 10, Server 2016, Windows 8, or Server 2012 one of these three solutions below should get you through:

Command Line to Launch Activation GUI:

This is handy if the GUI won’t start and you want to skip some steps to get it to work.
  1. click START (gets you to the tiles)4-no-change-product-key-link-missing-dns-error-0x8007232b-dns-error-activate
  2. type RUN
  3. type slui 3 and press ENTER
    1. yes, SLUI: which stands for SOFTWARE LICENSING USER INTERFACE
      1. SLUI 1 brings up the activation status window
      2. SLUI 2 brings up the activation window
      3. SLUI 3 brings up the CHANGE PRODUCT KEY window
      4. SLUI 4 brings up the CALL MICROSOFT & MANUALLY ACTIVATE window
  4. Type in your product key
  5. Have a nice day.

Command Line to Activate Windows Through Command Line:

  1. Launch a CMD as an Administratorcommand-line-to-activate-windows-slmgr-slui
  2. Type: slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
  3. Press Enter
If your key is valid and you are connected to the internet, it should activate within a second or two.

Call Microsoft Activation Center:

In Canada and the US, call the support line directly at 1 800-936-4900, otherwise, use this table of Microsoft Activation Phone Numbers to do the deed.
You also might find some of our previous posts on activation problems to be helpful:  urtech.ca/?s=activation